One of the strongest woods in the world
Environmentally friendly
Low maintenance
Up to a Class A fire rating for flame spread
Termite, Mold & Fungi resistant
No knots
High scratch & slip resistance
Can outlast composite material
Twice as strong as Oak
Time proven on many commercial projects
Better than teak
Great for docks, gazebos, benches, & tables
Worldwide shipping is available
Large selection of stock sizes
Up to 20 feet long
Up to 6x6 timbers
We custom mill to your dimensions
Comparably priced with composite decking choices
Available with hidden fastening system
Ipe Oil™ Hardwood Deck Finish
 |
Ipe Oil™ Hardwood Deck Finish Specially Formulated For Ipe Decking |
| Description | Ipe Oil™ is an oil based product which is specially formulated for Ipe Exotic Hardwood Decking. This means that it protects and conditions Ipe while also maintaining a natural appearance. Ipe Oil™ was developed with professional results in mind, providing exceptional penetration, water repellency and U.V. protection. |
| Features | * Trans-Oxide pigments to protect the wood from the sun’s harmful rays. |
| Wood Preparation | * Always clean gray or dirty wood before applying Ipe Oil™. Use Messmer’s Deck Cleaner. * Allow wood to completely dry for at least 24 to 48 hours. * Previously stained or treated wood should be sufficiently weathered to allow for complete penetration of Ipe Oil™ . |
| Product Application | * Read all label directions before using product. * May be applied with low pressure spray, brush or roller. * Apply ONE coat of Ipe Oil™ Hardwood Deck Finish. Brush out any puddles or runs. Excess product not absorbed within 5 minutes should be wiped down with a clean rag * Product will dry in 24 to 48 hours depending on temperature, type of wood and humidity. |
| Coverage | Approximately 300 square feet per gallon on dense hardwoods, such as Ipe. |
| Finish | Natural look when properly applied... with added grain enhancment of Ipe Decking. |
| Color | Natural |
| Pricing | $60.90 Per Gallon Buy Online |
Messmers Products
 |
MESSMER'S U.V. PLUS FOR HARDWOODS NATURAL WOOD FINISH |
| Description | U.V. Plus for Hardwood Decks is an oil based product that protects and conditions woods such as Ipe' and Mahogany while also maintaining a natural appearance. It has been produced with professional results in mind, providing exceptional penetration, water repellency and U.V. protection. |
| Features | * Trans-Oxide pigments to protect the wood from the sun's harmful rays. * Blend of natural and synthetic oils that condition and enhance the beauty of wood. * Long lasting water repellency * High solids content - over 40% * Low odor * Reduces warping, shrinking and cracking of wood. |
| Wood Preparation | * Always clean gray or dirty wood before applying UV Plus. Use Messmer's Deck Cleaner. * Allow wood to completely dry for at least 24 to 48 hours. * Previously stained or treated wood should be sufficiently weathered to allow for complete penetration of U.V. Plus. |
| Product Application | * Read all label directions before using product. * May be applied with low pressure spray, brush or roller. * Apply ONE coat of U.V. Plus For Hardwoods. Brush out any puddles or runs. Excess product not absorbed within 5 minutes should be wiped down with a clean rag * Product will dry in 24 to 48 hours depending on temperature, type of wood and humidity. |
| Coverage | Approximately 300 square feet per gallon on dense hardwoods. |
| Finish | Natural look when properly applied. |
| Color | Natural |
| Pricing | $60.90 Per Gallon |
 |
Messmer's Wood and Deck Cleaner and Brightener (Part A and B) |
 |
| Description | Messmer's Wood and Deck Cleaner and Brightener (Part A and B) powder concentrates are specially formulated to clean and brighten exterior wood decks, fences, log homes, and other exterior wood projects. | |
| Features |
* Cleans and brightens exterior wood * Use before staining wood * Excellent for deck maintenance * Biodegradable, safe and easy to use * Maximum strength |
|
| Wood Preparation/Product Application |
For cleaning only, or for hardwood, pine, or pressure treated wood, use just Wood & Deck Cleaner (Part A): After waiting for several minutes for product to dissolve and activate, apply with a mop or sprayer. Let the product sit on the deck surface for at least 10 minutes, making sure to keep the deck wet with more product if it begins to dry out. Scrub the deck boards with the grain of the wood. Rinse thoroughly with clean water. Allow the deck to dry for at least a day or two in good weather before applying any stain or finish. For cleaning and brightening of redwood and cedar, use both Wood & Deck Cleaner (Part A) and Wood & Deck Brightener (Part B): After waiting for several minutes for product to dissolve and activate, apply with a mop or sprayer. Let the product sit on the deck surface for at least 10 minutes, making sure to keep the deck wet with more product if it begins to dry out. Scrub the deck boards with the grain of the wood, then rinse thoroughly with clean water. Mix Wood and Deck Brightener in warm water according to label directions. Apply to the wet wood previously cleaned by Wood and Deck Cleaner. Allow the Brightener to sit on the surface for 15 minutes, keeping the deck wet with more product if necessary. Rinse thoroughly with clean water. Allow the deck to dry at least a day or two in good weather before applying any stain or finish. |
|
| Finish | Cleans and brightens exterior wood | |
| Pricing | Messmers Deck Cleaner Powder Form: $15.75/Package Messmers Deck Brightener Powder Form: $15.75/Package |
|
