Pregrooved Ipe Decking Page
For use with the Ipe Clip ® Fastener system for a screw free deck surface.
Above: Picture of our Pregrooveed Ipe which has a continuous groove down both sides of the boards for use with the Ipe Clip ® Fastener System. With this method you can quickly assemble your deck with no fasteners showing in the surface. This is also an available option for our 5/4x6 decking material.
Above: Picture of our Pregrooved Ipe Decking. With a Ipe Clip ® hidden deck fastener. The Ipe Clip ® fasteners give a deck surface free of nail or screw holes and speeds installation time. The bottom legs of the Ipe Clip ® fasteners preset the gap spacing between deck boards giving a nice uniform gap spacing throughout the deck. The stainless steel screw is driven at a 45 degree angle through the fastener, through the deck board, and into the joist. The next board then slides onto the other half of the Ipe Clip ® fastener that is protruding.
Above: Picture of our Pregrooved Ipe Decking installed using Ipe Clip ® hidden deck Fasteners.
Pregrooved 5/4x6 Ipe Decking Dimensions
| Reference |
Inches |
Centimeters |
|
A |
1/2" or (0.50") | 12.7 Millimeters |
|
B |
1" (1.0") | 25.4 Millimeters |
|
C |
5/32" (0.156") | 3.97 Millimeters |
|
D |
27/64" (0.422) | 10.72 Millimeters |
|
E |
27/64" (0.422) | 10.72 Millimeters |
|
F |
5 1/2" (5.50") | 139.7 Millimeters |
Use the buttons below to navigate our site.
